Medium induction heater TIH 100m 
 Medium bearing heater, heating and weighs 120kg bearing 
 SKF medium induction heater TIH 100m with SKF small induction heater with the same standard heating efficiency and job performance, and enhance the heating capacity. It is adhering to the SKF TIH ... m series all the advanced design of the heater, including the electronic circuit, overload, overheat protection, heating speed control and a removable control panel. 
 Placing the induction coil heater right side of the column, allows the heating of bearings weighing up to 120kg weight. TIH 100m heater overheating protection function to protect the electromagnetic induction coil and the electronic circuit boards. In addition to temperature control heating mode, the TIH 100m heater there for the heating of the other workpiece to control the heating mode. The heater comes standard with a yoke of three different specifications of the two working power supply standard models are available: 230V/50-60Hz; 400-460V/50-60Hz 
 The criteria used by the large size of the magnetic yoke of the rotating arm 
 Hot within 20 minutes 97kg weight bearing, saving time and energy 
 Two-speed heating function and a smaller yoke safely heating the smaller size bearings in the lower power consumption 
 Temperature mode, preset heating target temperature of 110 ° C to prevent bearing overheating 
 Automatic demagnetisation 
 3 years warranty 
 The SKF m20 concept 
 "M20", said the heaviest spherical roller bearings 231 series heated from 20 ° C to 110 ° C, the maximum weight (kg) can in 20 minutes. This parameter defines the actual heating capacity of the heater, rather than its energy consumption. 
 A induction coil is located in the heater the lateral column, the shorter heating time and lower power consumption 
 B foldable feet to facilitate heating large-diameter bearings 
 C magnetic temperature probe real-time monitoring of the heating temperature to prevent bearing overheating 
 D is easy to use control keys and LED display integrated in the removable control panel 
 Three yoke deposited in the storage space within the heater base, reducing the risk of yoke damage or loss 
 F and the heater base of one handle for easy transportation 
 G rotating arm 
 Technical parameters 
 Order TIH 100m 
 SKFm20 performance parameters of 97 kg 
 Voltage, the V / Hz 
 - TIH 100M/230V 230V/50-60Hz 
 - TIH 100M/MV 400-460V/50-60Hz 
 Workpiece: 
 - Maximum heating capacity of 120 kg 
 - Heating inside diameter range 20 - 400 mm 
 Temperature control: 
 - Range 0 - 250 ° C 
 - Magnetic temperature probe, K-type 
 - Accuracy (electronic control) ± 2 ° C 
 Time control: 
 - Range of 0-60 minutes 
 - Accuracy of 0.01 seconds 
 The maximum heating temperature of about 400 ° C 
 Temperature patterns are 
 Bearing mode 
 2 heating power: 50% -100% 
 In accordance with the SKF standards demagnetization (automatic) (<2 A / cm.) 
 Can be heat sealed bearings 
 Heated pre-lubricated bearings 
 The error code is 
 Thermal overload protection 
 Maximum flux of 1.7 T 
 Control panel control buttons and LED display integrated into a removable control panel 
 Face (wxh) 155 x 205 mm 
 Coil diameter of 110 mm 
 Dimensions (wxdxh) 570 x 230 x 350 mm 
 Total weight, including the magnetic yoke 42 kg 
 Maximum power of 3.6 kVA (230V) 
 4.0-4.6 kVA (400-460V) 
 Standard yoke number 3 
 Standard yoke size 56 x 56 x 296 mm, 
 Used to heat the inner diameter of 80mm and above the bearing 
 28 x 28 x 296 mm, 
 Used to heat the inner diameter of 40mm and above the bearing 
 14 x 14 x 296 mm, 
 Used to heat the inner diameter of 20mm and above the bearing 
 Yoke core cross-section of 56 x 56 mm 
 The storage space of the yoke, foldable support foot at the base of the heater inside 
 Sliding arm without 
 The rotating arm, only for the large size of the magnetic yoke 
 Cooling fan without 
 Shell material of steel and fiberglass 
 3 years warranty 

 The machine fertile, bearing the spot center professional to provide you with all kinds of bearings, while providing you with the image size and price-related information. You order from your bearing models confirm the correct installation and maintenance we will provide you with the most professional service! 
 Today, we machine fertile Chinese owned Schaeffler (INA / FAG), Sweden, SKF, Japan NSK, Timken Bearing (TIMKEN the) and other industry the world's leading brands of resources to support domestic agency ZWZ (ZWZ) Luo axis (LYC), Pegasus (TMB), no Xi Tuolin (TWB) authorized to sell. We will maximize the satisfaction of your models bearing needs! 

 If you want to learn more detailed information, please call our engineers 
 Machine fertile Chinese Contact :010 -5,629,152,715,321,025,609 13321199591 Contact person; Ho 
 Fax :010 -58,032,750 
 Website: http://www.bjinafag.cn/ www.zhongjiwohua.com 
 Welcome you call us