SKF large induction heater TIH 220m 
 TIH220m SKF large induction heater SKF bearing heater 
 SKF bearing heater can heat the weighing 300kg bearing 
 Large-scale induction heater TIH 220m is the SKF reliable, rugged TIH ... m series heater in a heating bearing a maximum weight of up to 300kg, other solid workpiece maximum weight of up to 150 kg. It is adhering to the SKF TIH ... m series all the advanced design of the heater, including electronic circuit overload, overheating protection, the sliding arm and removable control panel. 
 To get the maximum heating efficiency, need to be heated bearing outside the induction coil and induction coil, live-bearing central to shorten the heating time, reducing energy consumption. LED display / control panel integrated in a mobile controller, so that the heater is more convenient to use. In order to meet the needs of different regions of the world, the TIH 220m heater have different voltages to choose from. 
 Within 20 minutes, the TIH220m SKF large induction heater SKF bearing heater can heat a good 220kg weight bearing, saving time and energy 
 Yoke of TIH220m SKF large induction heater SKF bearing heater comes standard with two specifications can be heated more than the inner diameter of 60 mm, weighing 300 kg bearing 
 TIH220m SKF large induction heater SKF bearing heater two levels of heating power and small size of the magnetic yoke, bearings with low energy heating and small size 
 TIH220m SKF large induction heater SKF bearing heater temperature mode preset heating target temperature of 110 ° C to prevent bearing overheating 
 TIH220m SKF large induction heater SKF bearing heater automatic demagnetization function 
 TIH220m SKF large induction heater SKF bearing heater 3 years warranty 
 The SKF m20 concept 
 "M20", said the heaviest spherical roller bearings 231 series heated from 20 ° C to 110 ° C, the maximum weight (kg) can in 20 minutes. This parameter defines the actual heating capacity of the heater, rather than its energy consumption. 
 TIH220m SKF large induction heater SKF bearing heater 
 A induction coil is located in the heater the lateral column, the shorter heating time and lower power consumption 
 B foldable feet to facilitate heating large-diameter bearings 
 C magnetic temperature probe real-time monitoring of the heating temperature to prevent bearing overheating 
 D is easy to use control keys and LED display integrated in the removable control panel 
 The small size of the yoke can be stored in the storage space within the heater base, reducing the risk of yoke damage or loss 
 F and the heater base of one handle for easy transportation of TIH 220m 
 G sliding arm can be easily and quickly put on the bearings to be heated 
 Technical parameters 
 TIH220m SKF large induction heater SKF bearing heater 
 Order the TIH 220M/LV TIH 220M/MV 
 SKFm20 performance of 220 kg 
 Voltage, the V / Hz 
 - TIH 220M/LV 200-230V/50-60Hz 
 - TIH 220M/MV 400-460V/50-60Hz 
 Workpiece: 
 - Maximum heating capacity of 300 kg 
 - Heating inside diameter range 60 - 600 mm 
 Temperature control: 
 - Range 0 - 250 ° C 
 - Magnetic temperature probe, K-type 
 - Accuracy (electronic control) ± 2 ° C 
 Time control: 
 - Range of 0-60 minutes 
 - Accuracy of 0.01 seconds 
 The maximum heating temperature of about 400 ° C 
 Temperature patterns are 
 Bearing mode 
 2 heating power: 50% -100% 
 In accordance with the SKF standards demagnetization (automatic) (<2 A / cm.) 
 Can be heat sealed bearings 
 Heated pre-lubricated bearings 
 The error code is 
 Thermal overload protection 
 Maximum flux of 1.55 T 
 Control panel control buttons and LED display integrated into a removable control panel 
 Face (wxh) 250 x 255 mm 
 Coil diameter of 140 mm 
 Dimensions (wxdxh) 750 x 290 x 440 mm 
 Total weight, including the magnetic yoke 86 kg 
 Maximum power consumption of 10.0-11.5 kVA (400-460V) 
 The number of standard yoke 2 
 Standard yoke size 70 x 70 x 430 mm, 
 Used for heating inside diameter of 100mm and above bearing 
 40 x 40 x 430 mm, 
 Used to heat the inner diameter of 60mm and above the bearing 
 Yoke core cross-section of 70 x 70 mm 
 The storage space of the yoke, foldable support foot at the base of the heater inside 
 The sliding arm, only the magnetic yoke 70 x 70 x 430 mm 
 Rotating arm None 
 Cooling fan without 
 Shell material of steel and fiberglass 
 3 years warranty 

 The machine fertile, bearing the spot center professional to provide you with all kinds of bearings, while providing you with the image size and price-related information. You order from your bearing models confirm the correct installation and maintenance we will provide you with the most professional service! 
 Today, we machine fertile Chinese owned Schaeffler (INA / FAG), Sweden, SKF, Japan NSK, Timken Bearing (TIMKEN the) and other industry the world's leading brands of resources to support domestic agency ZWZ (ZWZ) Luo axis (LYC), Pegasus (TMB), no Xi Tuolin (TWB) authorized to sell. We will maximize the satisfaction of your models bearing needs! 
 If you want to learn more detailed information, please call our engineers 
 Machine fertile Chinese Contact :010 -5,629,152,715,321,025,609 13321199591 Contact person; Ho 
 Fax :010 -58,032,750 
 Website: http://www.bjinafag.cn/ www.zhongjiwohua.com 
 Welcome you call us